Electrical Equipment Should Be Disconnected During Floods. Why

No matter what caused the flood electrical appliances should be examined by a qualified service repair dealer before being re-energized and electrical items that were submerged should be discarded and replaced by a licensed qualified professional.

Electrical equipment should be disconnected during floods. why. Safe Electricity say that during a flood should electrical equipment come into to contact with flood water there is a serious danger of electrocutionAfter the event during the clean-up process when the flood waters have dispersed there are yet further risks as there are serious possibilities of electrocution from water damaged appliances. This makes the threat of electrocution during periods of flooding extremely high. All equipment such as transformers switches taps motors circuit breakers surge arrestors etc must be disconnected from the cable circuit to prevent damage to equipment and will prevent test interruptions due to flashovers or trip-outs resulting from excessive leakage current.

To Contact the Manufacturer. Moisture should be escaped by lifting the cover continuously or periodically. Speculation runs rife regarding whether the negative terminal of a vehicles battery should be disconnected before welding on that vehicle.

All salt deposits washed out with freshwater. Let qualified people from the power supplier handle these situations. Make sure that the measurements are not affected by leakage current through switches and over current protective devices.

Machine is disconnected from power sources and dismantled. Almost all electrical equipment will automatically disconnect their heavy loads from the grid during a failure AC units refrigerators furnaces heating equipment because they are switched to the on condition by electric switches which switch off when the power fails. Users of electrical equipment including portable appliances should carry out visual checks.

Distributors of electrical equipment should not use any inventory that has been subjected to water damage. Damage to electrical equipment can also result from exposure to flood waters contaminated with chemicals sewage oil and other debris. Remove the equipment from use immediately and check it repair it or replace it if.

Replace open front plugs with dead front plugs. Suspend extension cords temporarily during use over aisles or work areas to eliminate stumbling or tripping hazards. First we recommend ensuring that all electricity has been disconnected from your electrical equipment to ensure maximum safety from your electrical components.